Characterization of Activated Carbon from Industrial Solid Waste Agar with a Different Activator Concentrations

Khuril Zaqyyah, Sri Subekti, Mirni Lamid

Abstract


Production of seaweed processing generates a huge amount of waste, either waste solid or liquid waste. For solid waste contains a lot of organic carbon derived from cellulose or hemicellulose. Therefore, the solid waste that has the potential as a raw material of activated carbon. This study aims to determine the characteristics of the activated carbon produced from solid waste agar and determine the optimal concentration of activator that produced the best characteristics of the activated carbon. The treatment used is a different activator concentration which is designed using completely randomized design (CRD) with five treatments and four replications. The results showed the five treatments are significant differences in the characteristics of the ash and pure active carbon content. This study shows that the manufacture of activated carbon industrial solid waste agar with a different activator concentration influence on the characteristics of the active carbon with ash content parameter and pure active carbon content. The concentration of activator that can provide the highest value of pure activated carbon is in P5 with a concentration of 6 M. Based on this study are advised to do further research on how to lower the ash content of the activated carbon from solid waste agar.


Full Text:

PDF

References


Adinata, M. R. 2013. Pemanfaatan Limbah Kulit Pisang Sebagai Karbon Aktif. Skripsi. Fakultas Teknologi Industri Universitas Pembangunan Nasional “Veteranâ€. 33 pp.

Andriyono, S., Thajaningsih. W., Agustono, Masithah. E.D., Pursetyo. K.T., Abdillah. A.A. dan H. Pramono. 2015. Aplikasi Teknologi Asap Cair dalam Pengolahan dan Pengawetan Produk Perikanan di Pulau Mandangin. 7(1): 1-6.

Budiono A, Suhartana and Gunawan. 2009. Pengaruh Aktivasi Arang Tempurung Kelapa dengan Asam Sulfat dan Asam Fosfat untuk Adsorpsi Fenol. Skripsi. Universitas Diponegoro Semarang.

Faujiah, F. 2012. Pemanfaatan KArbon Aktif dari Limbah Padat Industri Agar –agar Sebagai Adsorben Logam Berat dan Bahan Organik dari Limbah Industri Tekstil. Skripsi. Fakultas Perikanan dan Ilmu Kelautan Institut Pertanian Bogor. 61 pp.

Gaya, U.I., Otene, E and A.H Abdullah. 2015. Adsorption of Aqueous Cd (II) And Pb (II) on Activated Carbon Nanopores Prepared by Chemical Activation of Doum Palm Shell. Springerplus. 4: 1-18.

Hadi, R. 2011. Sosisalisasi Pembuatan Arang Tempurung Kelapa dengan Pembakaran Sistem Suplai Udara Terkendali. Buletin Teknologi Pertanian. 16(2): 77-80.

Herlandien, Y.L. 2013. Pemanfaataan Arang Aktif Sebagai Adsorban Logam Berat dalam Air Lindi di TPA Pakusari Jember. Skripsi. Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember. 84 pp.

Jakfar, Agustono and A. Manan. 2014. Deteksi Logam Timbal (Pb) pada Ikan Nila (Oreochromis Niloticus) di Sepanjang Sungai Kalimas Surabaya. Jurnal Ilmiah Perikanan dan Kelautan. 6(1): 43-48.

Khairaini, F., Itnawita dan S. Bali. 2015. Potensi Arang Aktif dari Limbah Tulang Kambing sebagai Adsorben Ion Besi (III) Kadmium (II), Klorida dan Sulfat dalam Larutan. Jurnal Online Mahasiswa FMIPA. 2(1): 107-115.

Kilic, M., Varol, E.A and A.E Putun. 2012. Preparation and Surface Characterization of Activated Carbons from Euphorbia Rigida by Chemical Activation with ZnCl2, K2CO3, NaOH and H3PO4. Applied Surface Science. 261: 247– 254.

Kusriningrum. 2012. Perancangan Percobaan. Airlangga University Press. Surabaya. pp 84-86.

Pusat Pendidikan Lingkungan Hidup (PPLH). 2007. Arang Briket. Mojokerto: Seri Pendidikan dan Pengetahuan Umum. 49 pp.

Ramdja, A.F., Halim, M and Jo Handi. 2008. Pembuatan Karbon Aktif dari Pelepah Kelapa (Cocus nucifera). Jurnal Teknik Kimia. 2(1): 1-8

Saputra, D.R. 2008. Aplikasi Bioteknologi Pemanfaatan Limbah Rumput Laut. Kanisius. Yogyakarta.

Rathinam, A., Rao, J.R and B.U Nair. 2011. Adsorption of Phenol Onto Activated Carbon from Seaweed: Determination of Theoptimal Experimental Parameters Using Factorial Design. Journal of the Taiwan Institute of Chemical Engineers. 42: 952–956.

Sedayu, B.B., Widianto, N.T., Basmal, J and B.S.B Utomo. 2008. Pemanfaatan Limbah Padat Pengolahan Rumput Laut Gracilaria Sp. Untuk Pembuatan Papan Partikel. Jurnal Pascapanen dan Bioteknologi Kelautan dan Perikanan. 3(1): 1-10.

Siswati, N.D., Martini, N and W. Widyantini. 2015. Pembuatan Arang Aktif dari Tulang Ikan Tuna. Jurnal Teknik Kimia. 1(1): 26-29.

Sudrajat, R and G. Pari. 2011. Arang Aktif. Badan Penelitian dan Pengembangan Kehutanan – Kementrian Kehutanan. 57 pp.

Suwilin. 2007. Efektifitas Arang Aktif Kayu Sengon (Paraserianthes Falcataria L. Nielsen) dan Tempurung Kelapa (Coconus Nucifera L.) Untuk Pemurnian Minyak Goreng Bekas. Skripsi. Fakultas Kehutanan, Institut Pertanian Bogor.

Syamberah., Anita, S and T.A Hanifah. 2015. Potensi Arang Aktif dari Tulang Sapi sebagai Adsorben Ion Besi, Tembaga, Sulfat dan Sianida dalam Larutan. Jurnal Online Mahasiswa FMIPA. 2(1): 38-46.

Verlina, W.O.B. 2014. Potensi Arang Aktif Tempurung Kelapa Sebagai Adsorben Emisi Gas CO, NO dan NOx pada Kendaraan Bermotor. Skripsi. Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Hasanuddin Makassar. 69 pp.

Wibowo, S., Syafii,W and G. Pari. 2010. Karakteristik Arang Aktif Tempurung Biji Nyamplung (Calophillum inophyllum Linn). Jurnal Penelitian Hasil Hutan. 28(1): 43-54.




DOI: http://dx.doi.org/10.20884/1.oa.2018.14.1.327

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Lisensi Creative Commons

Omni-Akuatika by Fisheries and Marine Science Faculty - Jenderal Soedirman University is licensed under the Creative Commons Attribution 4.0 International License